Home » Posts tagged 'yard rakes'
Tag Archives: yard rakes
Pine Needle Rake is an absolute must for anyone looking to make their own yard a bit cleaner. There is nothing more frustrating than mowing your lawn only to have those knots and dirt show up where you didn’t intend. These handy tools will clean even the toughest dirt and knotty grass. Pine needles are especially tough to get rid of, but it does take some effort. If you’re going to attempt to do this on your own, it would be best to take the following steps before you even start.
The first step is to decide how much work you want to do. This will determine the size of the pine needle rake you need to buy. The larger the rake, the more work it will handle. You can purchase a smaller pine needle rake if you are only doing a few small jobs. For example, if you mow your neighbor’s lawn and only need to do a couple of trees, then a smaller pine needle rake will do the job.
Now you need to figure out what tools you will need to get this project up and running. You will need a saw, a drill, some nails, and some wood glue. The saw is always needed when cutting something solid. As for the drill, you only need one if you are only doing small jobs. As for the nails, there are plenty of nail guns available that are specifically made for pine. Glue is always needed for large projects.
After you have decided on all of these tools, you are ready to go shopping. Pine needle rakes come in a wide variety of styles and sizes. The best thing about wine is that it can withstand a lot of use from the human arm. This is great news if you plan to do any yard work or do hard jobs like mowing the lawn.
Once you have purchased your pine needle rake, you will want to set up your workshop in the exact location you will be working. You will need to make sure that there is no foot traffic in the area, so you may want to block off an entire section of the driveway or yard. If there are people in the area, they will know that you are working on your pine needles and won’t bother you. The last thing you want is a pile of pine needles up in your yard. Your wife will not be happy when she comes home from work and finds a huge mess inside the garage or basement.
If the pine needles are in a single long strand, you can separate the strand into two or three piles. Once you have the first two piles of pine, cut them down to a manageable size. Then you will want to separate the third, smaller pine needle from the rest of the strands. To do this, you will need a razor blade and a pair of pine scissor blades. These tools will help cut the smaller pieces of pine from the bigger pieces.
Once you have separated the pine needles from the rest of the strands, you will want to place all of the needles in one pile, but only one at a time. Place the larger needles in the center of the pile, and then lay the shorter needles across the middle of the pile. The shorter ones should be at the bottom, and the longer ones should be at the top. This will allow you to work easier by reducing the number of times you have to go back and move the needles around.
When you have completed this step, it is time to directly place the smaller pine needle onto the blade and run the blade over the pine needle. Once the needle has been run over the pine needle rake sometimes, the knot should come out easily. Once you have this step completed, you will then want to set your pine needle rake aside, clean the tool thoroughly and store it away. This process will ensure that you have a nice clean tool that you can use for many years to come.